CATEGORIES
  • 1
COUNTRY

Water flow meter

Flowmeters & temperature indicators
8 ANSWERS
17/10/2019

[What you are looking for]
- Water flow meter

[Requirements]
- Input Supply Rating : 0~8t/h
- Type : Vortex
- Fluid Pressure : max 20 bar
- Temperature : -30~200℃

Temperature transmitter / sensor

Flowmeters & temperature indicators , Measuring equipment , Sensors & Transducers
9 ANSWERS
22/08/2019

[What you are looking for]
- Temperature sensor for liquid and gas

[Requirements]
1. Pressure rating : 400 bar
2. Operating voltage : 18 ~ 32 DC
3. Measuring range : -50 ~ 150℃
4. Maximum load : 250Ω
5. Precision (analog output) ± 0.3K

Required protection : reverse polarity, short-circuit, overload

Lubrication oil for gears

Spring, Bearing, Gear
7 ANSWERS
21/07/2019

[What you are looking for]
- Lubrication for industrial steel gears. High load capacity, anti-friction required.

[Minimum Requirements]
- Viscosity grade (ISO 3448) : 220
- Viscosity index (ISO 2909) : 100
- Density @ 15℃ (ISO 12185) : 899
- Applying temperature up to 100℃

Specialized expert for Annealing process

Rolling, Heating, Cooling machine
9 ANSWERS
26/06/2019

[What you are looking for]
- I'm looking for the expert specialized in annealing process, Is it possible?

[Requirements]
- Located in Germany, Belgium.
- Paper, Project record with EU commission.

0.0

Lisa Seo | 26/03/2019

Dear Hong!

We highly recommend following experts based on their research performance.
Please see the attachment (list of reseach articles).

Prof. Dierck Raabe (Max-Planck)
Prof. Kirsten Bobzin (RWTH Aachen University)

If you need more details, please use our concierge service.
(Click my ID and then send inquiry to me).

Squareness ruler

Measuring equipment
9 ANSWERS
08/05/2019

[What you are looking for]
- Digital squareness ruler to measure angle

[Requirements]
- 1m length, digital angle meter
- Possible to calibrate

Non slippery step material

Safety equipment
10 ANSWERS
26/04/2019

[What you are looking for]
- Non slippery material for step : step, step cover, mat, anti slip, etc..
- Slippery condition due to grease or oil from motor

[Requirements]
- Anti slip function should be kept as long as possible.

Side paint marking automation machine for heavy plate

12 ANSWERS
07/01/2019

Anonymous

[What you are looking for]
- Side paint marking machine for heavy plate
Marking the bar code and number of product on the edge of heavy plate
- Sequence : ① Spraying white background, ② Painting black colored number of plate, barcode with X, Y axis moving

[Requirements]
- Robust X, Y-axis moving
Without trouble in ink jet system and without nozzle clogging
- Detailed product information, Price information, references in steel industry

* Refer to attached similar application

5.0

Industrial, Plants | 21/02/2019

Dear Customer!
We highly recommend the company "REA-JET (Germany)"

* Foundation : 1982
* Employees (2018) : More than 400
* Certified : DIN EN ISO 9001:2015

Please let us know, if you have further request.
We contact on your behalf and help you to close the deal.

Internal cooling Roll

Rolling machine ,
13 ANSWERS
20/12/2018

Anonymous

[What you are looking for]
- Internal cooling type roll with high wear resistance (hard facing)
- Dia 400mmΦ x Length above 4500mm
- Mechanical properties : [Tensile strength] above 440 Mpa, [Yield strength] above 305 Mpa

[Requirements]
- References in steel industry, Price information
- Welding type of roll (seamless, ERW, etc.)

5.0

Industrial, Plants | 02/12/2018

Dear Customer!
We highly recommend the company
"GUSTAV WIEGARD MASCHINENFABRIK GMBH & CO. KG"

* Foundation : 1902
* Revenue (2015) : 11 Million EUR
* Employees (2015) : 68

Dear Customer,

Internal cooling type rolls with high wear resistance (hard facing) is amongst others one of our core products.
We would love to quote on this if you would invite us for this project.

Please send us all data such like drawing, BOM’s and technical specification.
We will be to quote these type of products within a couple of days.

With best regards/Mit bestem Gruß
Gustav Wiegard MASCHINENFABRIK
Gustav Wiegard

-Managing Director-

Penertration test paint

Inspection & testing
10 ANSWERS
15/12/2018

[What you are looking for]
- penertrant, developer

[Requirements]
- temperature range -20~45℃
- Bulk spray type
- Price information

5.0

Industrial, Plants | 29/10/2018

Dear Customer!
We highly recommend these companies, detail information is attached.
- MR-CHEMIE (Germany)

They have several Penetration test material.
Please find attached product information of our partner.

You'll also get answers from other partners interested in your inquiry.

Shear blade for high strength steel

Cutting equipment
13 ANSWERS
03/12/2018

[What you are looking for]
o Shear cutting knife for high strength heavy plate.
o Maximum Tensile strength of plate 1,300 Mpa
o Maximum thickness to cut 60mm

※ Current property : high carbon steel balde 0.5wt%C <
strength YP 485~680Mpa, TS 800~1,000Mpa
Type 1 : HRC 52~58, Type 2 : HRC 54~60

[Requirements]
o Type1
- Knife Size :
① 100 thickness x 190 width x 5800 length (Semicircular shape),
② 100 thickness x 150 width x 5800 length (Bar shape)
- Over than HRC 52~58

o Type2
- Knife Size :
① 100 thickness x 170 width x 2076 length (Semicircular shape),
② 100 thickness x 170 width x 2076 length (Bar shape)
- Over than HRC 54~60

o Without spalling, Life span over than 2 weeks.

5.0

Industrial, Plants | 07/12/2018

Dear Customer!
We highly recommend these companies, detail information is attached.

○ Steinstosser Qualitätswerkzeuge GmbH & Co. KG
* Country : Germany
* Foundation : 1904
* Employees : 47
* Revenue : More than €10 million

○ Kreso
* Country : Germany
* Foundation :1870
* Employees : 50
* Revenue : Less than €1 million

5.0

IKSINC | 18/02/2019

Dear Namkyu,

Blades are over 225” in length; they are probably made in sections, and then machined into a matched set.
Each blades 5800 mm weighs more than 1900 pounds each; difficult to manage unless in sections.
Only blade material we could recommend due to side is H-13 tool steel; it should be hardened and tempered to 50-54 HRc

Each blade section 5800 mm x 190 mm x 100 mm would cost about $19,750.00 each if we can make in sections.
Delivery depends on material availability; we would estimate around 12 weeks.

Thanks,
Jim Ranson
· email: jranson@iksinc.com
· office: 843-292-1472 cell: 843-610-5486
· 1435 N Cashua Dr., Florence, SC 29501
· website: www.iksinc.com