CATEGORIES
COUNTRY

Shear blade for high strength steel

Cutting equipment
13 ANSWERS
03/12/2018

[What you are looking for]
o Shear cutting knife for high strength heavy plate.
o Maximum Tensile strength of plate 1,300 Mpa
o Maximum thickness to cut 60mm

※ Current property : high carbon steel balde 0.5wt%C <
strength YP 485~680Mpa, TS 800~1,000Mpa
Type 1 : HRC 52~58, Type 2 : HRC 54~60

[Requirements]
o Type1
- Knife Size :
① 100 thickness x 190 width x 5800 length (Semicircular shape),
② 100 thickness x 150 width x 5800 length (Bar shape)
- Over than HRC 52~58

o Type2
- Knife Size :
① 100 thickness x 170 width x 2076 length (Semicircular shape),
② 100 thickness x 170 width x 2076 length (Bar shape)
- Over than HRC 54~60

o Without spalling, Life span over than 2 weeks.

5.0

Industrial, Plants | 07/12/2018

Dear Customer!
We highly recommend these companies, detail information is attached.

○ Steinstosser Qualitätswerkzeuge GmbH & Co. KG
* Country : Germany
* Foundation : 1904
* Employees : 47
* Revenue : More than €10 million

○ Kreso
* Country : Germany
* Foundation :1870
* Employees : 50
* Revenue : Less than €1 million

5.0

IKSINC | 18/02/2019

Dear Namkyu,

Blades are over 225” in length; they are probably made in sections, and then machined into a matched set.
Each blades 5800 mm weighs more than 1900 pounds each; difficult to manage unless in sections.
Only blade material we could recommend due to side is H-13 tool steel; it should be hardened and tempered to 50-54 HRc

Each blade section 5800 mm x 190 mm x 100 mm would cost about $19,750.00 each if we can make in sections.
Delivery depends on material availability; we would estimate around 12 weeks.

Thanks,
Jim Ranson
· email: jranson@iksinc.com
· office: 843-292-1472 cell: 843-610-5486
· 1435 N Cashua Dr., Florence, SC 29501
· website: www.iksinc.com