As a leading supplier of sensors, measuring systems, laser markers, microscopes, and machine vision systems worldwide, KEYENCE is at the forefront of factory automation. We strive to develop innovative and reliable products to meet the needs of our customers in every manufacturing industry.
In addition to our world-class products, KEYENCE offers a full range of services to further assist our customers. Our technically trained direct sales force is able to solve tough applications and answer technical questions about our products. We also provide fast shipping so customers can improve their processes as quickly as possible.
KEYENCE is dedicated to adding value to our customers by combining superior technology with unparalleled support.
SINT Technology is a privately owned company, which has been in business since 1990. The company is located in Calenzano, near Florence (Italy).
Employing a staff of 50 employees, mostly university graduates and qualified technicians, the company has the expertise and the infrastructure to perform activities regarding testing, production of measurement equipment, mechanical and electronic design, software development.
SINT Technology’s main business activities are:
Laboratory measurement, testing, analysis and diagnostic services applied to stress, vibration, noise, emissions and the thermodynamic performance of machinery and plants
Production of measuring equipment for residual stress analysis, drilling resistance, fluid dynamic probes.
Mechanical and electronic design engineering, construction and supply of special equipment.
Design engineering and production of software for various applications: as an integral part of measuring equipment produced by SINT Technology, for acquisition of laboratory data, and for custom-design computer programs.
Training: Strain gauge measurement courses and examinations for first and second-level certification for electrical resistance strain gauge testing engineers. Our examination center is the only center recognised in Italy (by CIC-CPND, the Italian Coordination Centre for Non-Destructive Testing). Courses are also held on residual stress measurement by mechanical methods and on measurement uncertainty.
Since 2010 SINT Technology has been accredited to standard ISO/IEC 17025:2005 by the Italian accreditation body ACCREDIA with accreditation number 910. The accredited tests concern the sectors of strain gauge measurement, residual stress, vibration, modal analysis, acoustics performance testing.
SINT Technology’s Management System has conformed to the requirements of standard ISO 9001 and BS OHSAS 18001 for the following activities:
mechanical, electronic and software design engineering for prototypes of new machines
design and construction of test facilities and data acquisition systems
noise level, vibration, turbomachinery performance and strain gage measurement services
The certification body Det Norske Veritas (DNV) issued Certificate CERT-02678-98-AQ-BOL-SINCERT, attesting conformity of the company’s Quality Management System to standard UNI EN ISO 9001:2008.
We are the specialists for non-contact temperature measurement. Everything from a single source is our claim: development, production, sales and service. We support you in solving your measurement problem and have more than 25 years of experience in the field of non-contact temperature measurement.
The extensive product range includes stationary thermal imaging cameras and portable infrared cameras, infrared line cameras, digital pyrometers, calibration emitters, infrared sensors, software and services. According to the state of the art we realize complete customized system solutions for non-contact temperature measurement in industry and research. Benefit from our powerful and worldwide competence network.
Steel furniture and equipment for enterprises, offices, schools - metal lockers, storage cabinets, workbenches
Since 1870 Kremer, Sondermann GmbH & Cie. has been producing machine knives and wear parts for a large user market worldwide. For our international customers there is an offer for a wide range of knives in different types and sizes for a lot of industrial branches.
Since 1959, all products are manufactured in the factory in D-42349 Wuppertal-Cronenberg, Hauptstr. 67 with approx. 50 employees.
WELCOME AT STEINSTOSSER.
We are Germany’s eldest manufacturer of machine knives. A solid business run in forth generation by family members – top notch and a trustable partner at the same time.
Steinstosser holds a market leading position as manufacturer of original knife and wear part equipment in many machine works segments. In this area our products fulfill the strictest quality requirements – know how all of our clients benefit from.
The most suitable material, a perfect geometry and the optimum of heat treatment: We are producing reliable high-quality machine knives that grant low-cost operation and a long service life.
Industrious thanks to advanced technology and knowledge – and at the same a reliable and fair business partner: We at Steinstosser serve you personally and supply quickly and dependably, even if you have short-term demands.
Through our services you’ll get your knives where you need them, in the quality you need them to be, when you need them – and with a convincing cost efficient ratio. Thats a promise.
Easydur Italiana was founded in 1985 because the proprietor Mr. Renato Affri, with the strength of the experience he had acquired in his family business dealing with the design and construction of hardness testers, felt the need to fill a gap that had been created in Italy in the sector of spring testing.
With his pioneering spirit and solid technical preparation, he was able to develop and bring EASYDUR to the high technological levels of today.
Easydur was the first company to fit a camera on hardness testers for Brinell tests, thus revolutionising the hardness world. This innovation was immediately welcomed and accepted by the market, considering the success that it obtained.
At the same time, Easydur concentrated on the problems of springs, designing and developing more and more advanced measurement and control instruments to try to reply to the market’s increasing demands, collaborating with Customers and with University Centres, collecting the various requests that emerged.
Today the company can boast a complete range of measurement instruments (from 10N to 100Ton) for traction and compression, torsion and hardness tests and, last but not least, vision systems for image analysis which our national and international Clientele have adopted in the most varied sectors such as aeronautics, automotive, railway, spring manufacturing, forges and foundries, as well as in the best universities.
Both software (based on Windows) and hardware are developed in-house to be flexible and to allow us to customise the machines to suit the Customer’s specifications.
The company also possesses a notable fleet of machine tools, since it has always had a strong mechanical vocation, making also the mechanical parts in-house.
All our machines and automatic systems strictly respect European and international standards and are all certifiable by official calibration centres.
The after-sales service all over the world is guaranteed by a highly prepared technical staff.
Easydur is distinguished for its tenacity and flexibility in solving different cases in the field of control and quality and, since 2014, it has moved to its new production site with an area of 2000 square metres, where it can create large systems and improve organisation thanks to 300 square metres of office space.
Our beginnings were humble rocks, but after more than 100 years, we know how to rock science. Every day at 3M, we explore, we connect and we invent. And we've opened the door to show the world the unique, multi-dimensional ways 3M science can touch your life.
We've started the conversation with a fresh new look…
Contrôle Mesure Systèmes SA (CMS) is a leading manufacturer of NDT equipments and NDT systems. We design, develop and manufacture a complete range of NDT equipments for eddy current and ultrasonic inspection. Our goal is to provide performing turnkey solutions aimed to improve safety, efficiency and profitability of our customers. We are also always willing to improve the performances of our NDT equipments and machines.
With our staff, composed of engineers in Software, Mechanics and Electronics, we invest and develop new technologies to meet customer’s quality requirements,which are more and more demanding : new electronics and software (Zet@ range), rotating heads (ET and UT which are able to turn around the part at high speeds), complete turnkey systems with associated mechanics. In addition, we operate a laboratory for design and manufacture of standard or special probes and coils on requirement.
Founded in 1988, CMS is a private and independent company based in Burgundy in its own building of 2500 m².
ROHMANN GmbH was founded in 1977 with a staff of two to solve special applications in the aviation industry.1959
The first big success in the market was the introduction of the ROTOTEST B500, the world’s first battery-powered test instrument with display