The company MR® Chemie GmbH operates all over the world and is a manufacturer of specialised innovative products and devices for surface crack testing.
Microcracks can be detected quickly and precisely using various methods, including Penetrant and Magnetic Particle Testing.
In line with its corporate philosophy of "Providing maximum test-reliability and environmental compatibility for our clients", MR® Chemie is a company with a strong customer-orientation which develops, produces, bottles and delivers everything itself.
Its products and services are used by foundries and engineering, including high-end testing in the aviation and nuclear power industries.
As holders of a certificate according to EN ISO 9001:2000 we constantly monitor customer satisfaction levels. This feedback, plus our consistently increasing sales figures, confirm the high level of customer satisfaction in the quality and cost-effectiveness of MR® Chemie products.
We also use our customers' feedback as an opportunity for innovative problem-solving. We will gladly develop with you and for you product variants which correspond with your indiviudal requirements. Use our strength to your advantage!
MR® Chemie contributes notably to your safety!
Competent, flexible, customer-oriented, future-oriented - using environmental-friendly systems.
MR® Chemie – Quality guaranteed
Founded in 1973 as a full subsidiary of the VDEh Institute for Applied Research (VDEh-Betriebsforschungsinstitut (BFI)), BFI Betriebstechnik GmbH has since earned an outstanding reputation in the metalworking industry. Based on fundamental BFI research, we develop, conceptualise and produce practical and metrological solutions for the steel, iron, and aluminium industry.
Our team, consisting of highly skilled engineers and highly trained specialists, is thereby able to rely on the know-how and competency of more than 40 years’ experience in measurement technology – from the implementation of operational measurements and scientific support of research projects to the development of electronic measuring systems and their manufacture and launch. We focus on flatness measurement and control. One of our milestones was and still is the development, production and launch of the world’s first fully electronic bi-directional rotary transmission system for the transmission of measurements and control signals (data and energy) in the operation of shapemeter rolls. Of these rotary transmitters, nearly 2000 systems are already in use in many countries across the world.
BFI Betriebstechnik GmbH has also driven the conceptualisation and development of systems for the online / inline measurement of physical variables. Successfully launched products include DynTemp for measuring the temperature of molten metals, DynAcid for measuring mordant concentrations, and DynGas to determine the combustion quality of process gas. BFI Betriebstechnik GmbH’s latest development is a new, innovative testing system called FIDUS (Fault Identification on Rods and Wires via Ultrasound). The only system of its kind worldwide, it detects inner and outer defects simultaneously using a single test head
QASS is a medium-sized company in Wetter (Ruhr) in North Rhine-Westphalia, Germany, and world market leader when it comes to crack detection in straightening of gear shifts. Measurement systems of QASS, like the Optimizer4D, enables a qualification of multiple processes:
Detect cracks in component parts
Monitor tools and
About 50 people are working at QASS. The company was founded by CEO Ulrich Seuthe in 2001. Sales and service partners are working in China, South Korea, Japan, Mexico and in North and South America.
Quality is an essential requirement to gain benefits on the market. Measurement systems of QASS do not just enable to produce on the highest level of quality – but also to analyze and document processes. Even in processes that were barely not qualifiable so far.
Our experiences with acoustic emission analysis ran into the development of our high frequency impulse measuring technique and resulted in our measuring computer Optimizer4D. The project is still assisted by the Federal Ministry of Economy and Technology. By now multiple Optimizer4D have been put to duty with great success, both in manufacturing and in research. Some of these Optimizer4D monitor manufacturing processes that have been considered impossible to monitor.
QASS technicians are on the road for our customers worldwide. To provide a fast, qualified and straightforward service QASS acts jointly with partners worldwide and maintains a branch in the US.
QASS is always searching for qualified employees. If you are seeking work please have a look at our job advertisements. If you are interested please send your application papers to firstname.lastname@example.org. We will contact you.
Coding and marking solutions across the globe
The development of industrial coding and marking solutions for various products and surfaces has been our core business since 1982. Today, thousands REA JET systems are being used throughout the world for assuring efficient identification and traceability. The integration of our solutions forms elementary basis for a successful realization of advancing digitalization and Industry 4.0 revolution along the entire production and process chain.
Being a system supplier, it goes without saying that we provide all solutions from a single source. REA is the first choice in the harsh industrial environment of steel, wood, rubber and plastic processing plants, but also master the most demanding coding and serialization tasks, e.g. in the pharmaceutical and food industries.
Production, innovation as well as continuous improvement of our entire coding and marking portfolio is realized at our Headquarters in Germany. With the DIN EN ISO 9001:2015 certification, we prove that our customers receive products and services according to the highest quality standards valid worldwide. All this together makes us as a strong and reliable partner for the growing number of our worldwide customers and distribution partners.
Each of our products includes added values that are of benefit to our customers. However, these values cannot be easily quantified. This is why we give you a survey of the GW | (added) value.
OPTIMIZED COST-BENEFIT RATIO
All our products are continuously controlled. From the choice of raw material to the customer's individual cut we are optimizing in two respects: The profit improvement must be monetarily measured and the production costs must not increase accordingly. With regard to the total service lifetime of our products, they are considerably more favourable than the ones of our competitors.
SCOPE FOR INCREASE
It goes without saying that our products are manufactured to solve problems. We operate in the background so that our customers do not need to be busy with our rolls and roll systems as long as possible - because of their long-lasting performance.
We develop new ideas for improvement from the substantial experience we gained throughout the world. Thus, we can optimize details and close gaps.
As we do not only manufacture new products but also completely refurbish components we exactly know why parts wear off, when they have to be dismounted and what technical performance results in optimal repair. Every new order increases our knowledge that we willingly share with our customers to provide the best solutions for your company.
On the purchase of our products our customers obtain a full package of guarantees: On time delivery, process reliability and a high investment security. We guarantee individual service life times for all our products. By means of product certificates the complete documentation of the production process is provided. Our documentation includes all products manufactured at our facilities as well as the raw-materials from our sub-suppliers such as forging companies or manufacturers of welding material.
International Knife and Saw (IKS) is a manufacturer of high quality industrial machine knives and accessories. IKS is a privately held, American owned company with headquarters in Florence, South Carolina including additional IKS owned operations in Granby, Quebec and Queretaro, Mexico.
IKS industrial machine knives are industrial consumable items that are marketed throughout the world via multiple sales channels. Businesses who are end users of the products will install the blades on equipment specifically designed for converting materials such as paper, tissue, towel, metal, plastic and rubber into a finished product or a component of a finished product.
Technology driven, IKS is a company that delivers value long after the initial sales transaction has concluded. Sales engineers travel the entire world offering IKS customers technical service that includes best practices training for machine operators. The IKS technical team consists of a veteran group of mechanically minded individuals who understand how to optimize the customer’s cutting process.
New products from IKS are constantly being developed and introduced into the marketplace. The patent pending IKS log saw blade grinder, was developed for the tissue and towel market (today over 50 systems are in operation) and has found overwhelming results. Customers have reported quantifiable savings that result in a ROI of 12 months or better when measuring improved cut quality, reduced downtime and extended blade life.
PIX is among the most reliable manufacturers in the global Mechanical Power Transmission industry with an extensive range of high-performance V-Belts, Timing, and Poly-V belts to suit a wide array of Industrial, Agricultural, Lawn & Garden, and Automotive applications.
With over four decades of expertise in manufacturing Rubber Belts, PIX prides itself on a vast reserve of technical know-how and experience in providing best-of-class quality, in compliance with all International Standards and a host of important product type certifications.
The company has been on the forefront of technological advancement in this space through continual investment in state-of-the-art manufacturing facilities, an ultra-modern, fully-automated Rubber Mixing plant, nationally accredited research and development laboratories, highly sophisticated testing centres, managed by a dynamic team of talented professionals.
Availability and service are ensured worldwide through its 100% owned subsidiary companies in several countries as well as via a network of committed distribution partners in over 100 countries.
PIX is driven to solve real customer problems by developing and delivering an extensive range of products with a compelling performance to price ratio, backed up with unmatched customer care by following best industry practices, robust processes and sound business ethics.
The Berndorf Band Group has attained the position of global leader in the production of steel belts and steel belt systems thanks to their 90 years of experience. A wide area of industries use our services ranging from Automotive to Plastics.
We develop, produce and distribute highly specialized systems for factory automation and quality control since 1965. Our sensors and controllers solve tasks that are not solvable with standard sensors.
Our heart beats for quality “Made in Germany”. Since 1995, our company is certified to ISO 9001.
As a flexible, modern company, we provide our customers with the certainty that they can count on our expertise and our presence in the future.
Eurotek is a brand that refers to a long tradition in the industry of extrusion technology, manufacturing and R&D. Founded in 1993, the company is a worldwide leader in the production of customized extrusion crossheads specifically designed for the extrus