Each of our products includes added values that are of benefit to our customers. However, these values cannot be easily quantified. This is why we give you a survey of the GW | (added) value.
OPTIMIZED COST-BENEFIT RATIO
All our products are continuously controlled. From the choice of raw material to the customer's individual cut we are optimizing in two respects: The profit improvement must be monetarily measured and the production costs must not increase accordingly. With regard to the total service lifetime of our products, they are considerably more favourable than the ones of our competitors.
SCOPE FOR INCREASE
It goes without saying that our products are manufactured to solve problems. We operate in the background so that our customers do not need to be busy with our rolls and roll systems as long as possible - because of their long-lasting performance.
We develop new ideas for improvement from the substantial experience we gained throughout the world. Thus, we can optimize details and close gaps.
As we do not only manufacture new products but also completely refurbish components we exactly know why parts wear off, when they have to be dismounted and what technical performance results in optimal repair. Every new order increases our knowledge that we willingly share with our customers to provide the best solutions for your company.
On the purchase of our products our customers obtain a full package of guarantees: On time delivery, process reliability and a high investment security. We guarantee individual service life times for all our products. By means of product certificates the complete documentation of the production process is provided. Our documentation includes all products manufactured at our facilities as well as the raw-materials from our sub-suppliers such as forging companies or manufacturers of welding material.
International Knife and Saw (IKS) is a manufacturer of high quality industrial machine knives and accessories. IKS is a privately held, American owned company with headquarters in Florence, South Carolina including additional IKS owned operations in Granby, Quebec and Queretaro, Mexico.
IKS industrial machine knives are industrial consumable items that are marketed throughout the world via multiple sales channels. Businesses who are end users of the products will install the blades on equipment specifically designed for converting materials such as paper, tissue, towel, metal, plastic and rubber into a finished product or a component of a finished product.
Technology driven, IKS is a company that delivers value long after the initial sales transaction has concluded. Sales engineers travel the entire world offering IKS customers technical service that includes best practices training for machine operators. The IKS technical team consists of a veteran group of mechanically minded individuals who understand how to optimize the customer’s cutting process.
New products from IKS are constantly being developed and introduced into the marketplace. The patent pending IKS log saw blade grinder, was developed for the tissue and towel market (today over 50 systems are in operation) and has found overwhelming results. Customers have reported quantifiable savings that result in a ROI of 12 months or better when measuring improved cut quality, reduced downtime and extended blade life.
SINT Technology is a privately owned company, which has been in business since 1990. The company is located in Calenzano, near Florence (Italy).
Employing a staff of 50 employees, mostly university graduates and qualified technicians, the company has the expertise and the infrastructure to perform activities regarding testing, production of measurement equipment, mechanical and electronic design, software development.
SINT Technology’s main business activities are:
Laboratory measurement, testing, analysis and diagnostic services applied to stress, vibration, noise, emissions and the thermodynamic performance of machinery and plants
Production of measuring equipment for residual stress analysis, drilling resistance, fluid dynamic probes.
Mechanical and electronic design engineering, construction and supply of special equipment.
Design engineering and production of software for various applications: as an integral part of measuring equipment produced by SINT Technology, for acquisition of laboratory data, and for custom-design computer programs.
Training: Strain gauge measurement courses and examinations for first and second-level certification for electrical resistance strain gauge testing engineers. Our examination center is the only center recognised in Italy (by CIC-CPND, the Italian Coordination Centre for Non-Destructive Testing). Courses are also held on residual stress measurement by mechanical methods and on measurement uncertainty.
Since 2010 SINT Technology has been accredited to standard ISO/IEC 17025:2005 by the Italian accreditation body ACCREDIA with accreditation number 910. The accredited tests concern the sectors of strain gauge measurement, residual stress, vibration, modal analysis, acoustics performance testing.
SINT Technology’s Management System has conformed to the requirements of standard ISO 9001 and BS OHSAS 18001 for the following activities:
mechanical, electronic and software design engineering for prototypes of new machines
design and construction of test facilities and data acquisition systems
noise level, vibration, turbomachinery performance and strain gage measurement services
The certification body Det Norske Veritas (DNV) issued Certificate CERT-02678-98-AQ-BOL-SINCERT, attesting conformity of the company’s Quality Management System to standard UNI EN ISO 9001:2008.
ROHMANN GmbH was founded in 1977 with a staff of two to solve special applications in the aviation industry.1959
The first big success in the market was the introduction of the ROTOTEST B500, the world’s first battery-powered test instrument with display
TELEMEDICA produces control systems and alarm devices for distribution plants of medical, technical and industrial gases.
It performs directly the design and the development of its products and also provides advice for the construction of new distribution plants.
The products range developed for the medical field is…
Innovation with tradition
ITD GmbH is a medium-sized company in the electromedical engineering sector. We have developed, produced and marketed medical mounts and equipment carts for over 20 years. Our highly professional product solutions for stationary and mobile equipment mounts are used in a wide variety of…
Bonini SRL is a leading company in business to business market of plastic components for pharmaceutical use and since its foundation in 1959 has been increasingly growing.
Luigi Bonini decided to open the Bonini SRL company in 1959. The first activity unit was strictly related to the realization of moulds, but…
Cyanagen Srl is a biotech company located in Bologna, dedicated to research, development and production of reagents for molecular biology since 2003. Currently Cyanagen is one of the leading companies in the field of reagents for Western blotting and ELISA.
The main product lines are focused on chemiluminescence and…
Frimed was established in 1997, as result of twenty year experience of its owners in medical refrigeration field. Constant research and development, along with professional and serious attitude have enabled frimed to design and manufacture highly reliable refrigerators and freezers to be used in hospital, laboratory,…
For ten years, TNI® medical AG has had one goal: to develop nasal high flow therapy in order to provide highly efficient and comfortable respiratory support to patients suffering from respiratory insufficiency. Based on intensive research and realized by precise development in Therapy with Nasal Insufflation (TNI),…